Automatic High Performance Doors

speedmaster1600

The Speed-Master 1600 high speed industrial door includes the following standard features:

  • Bulldog XT panel material with full-width transparent PVC vision area. Colors: Blue, black, orange and gray.
  • Quick ConnectTM HFC1 programmable contverter control box with NEMA 4 enclosure. Includes plug-in cable connectors to control box. Optional hard-wired control box available.
  • 230v or 460v/3 phase/60 Hz direct-drive motor with soft start/stop technology.
  • Panel reversing electric contact edge.
  • Opening speed of up to 60″ per second.
  • Bottom aluminum profile with impact breakaway tabs.
  • Patented interlocking anodized aluminum hinge profile sections.
  • Low-profile guide tracks are galvanized steel, one-piece construction with replaceable dual brush style draft seals. Optional hinged, enamel painted steel guide tracks with full-height nylon brush seals are available.
  • Horizontal top draft seal.
  • Two panel reversing photocells.
  • Trusted 5 & 2 Warranty: Five years on the motor and panel material, two years on all other mechanical and electrical components.

speedmaster2600

The Speed-Master 2600 high speed industrial door includes the following standard features:

  • Bulldog XT panel material with full-width transparent PVC vision area. Colors: Blue, black, orange and gray.
  • Quick ConnectTM HFC1 programmable contverter control box with NEMA 4 enclosure. Includes plug-in cable connectors to control box. Optional hard-wired control box available.
  • 230v or 460v/3 phase/60 Hz direct-drive motor with soft start/stop technology.
  • Panel reversing electric contact edge.
  • Opening speed of up to 36 ” per second.
  • Bottom aluminum profile with impact breakaway tabs.
  • Patented interlocking anodized aluminum hinge profile sections.
  • Low-profile guide tracks are hinged, enamel painted steel with full-height nylon brush seals.
  • Horizontal top draft seal.
  • Two panel reversing photocells.
  • Trusted 5 & 2 Warranty: Five years on the motor and panel material, two years on all other mechanical and electrical components.

Speed Commander

The Speed-CommanderTM 1400 SE high speed industrial door includes the following standard features:

  • Unique, vertically flexible, BreakAwayTM SoftEdge profile system. In the case of a collision, the door panel breaks away without damage and is easily fed back into the guide tracks, minimizing damage to goods and reducing risk or injury to personnel.
  • Quick ConnectTM HFC1 plug-in control box simplifies installation. Simply plug and twist the cable connectors to the designated receptacles on the bottom of the control box and the door is ready to go. Includes diagnostic capabilities and adjustable time delay.
  • Fast opening speed of up to 100″ per second promotes effective material handling.
  • Direct drive electric motor/gearbox, 230v or 460v / 3phase/ 60 hz.
  • 1/16″ thick reinforced PVC panel material is tear and puncture resistant. Color choices: orange, blue, yellow, red or gray.
  • Full-width vision area.
  • Horizontal spring steel wind-lock profiles with twin rollers, integral with door panel.
  • Full-width top draft seal.
  • Fast operating speed.
  • Guide tracks are gray, impact resistant, self-supporting galvanized steel.
  • Electric door panel reversing edge and photocell.
  • Cycle counter.

speedguardian

The Speed-GuardianTM 2000 with proven door technology provides a highly accelerated opening speed, supporting a continuous workflow.

  • Quick ConnectTM HFC1 plug-in control box simplifies installation. Simply plug and twist the cable connectors to the designated receptacles on the bottom of the control box and the door is ready to go. Includes diagnostic capabilities and adjustable time delay.
  • Fast operating speed of up to 80″ per second supports a continuous workflow.
  • Electric motor, 230v or 460v/3ph/60 Hz electric power is standard.
  • Panel: Secure 1-1/4″ total thickness constructed of two 1/16″ thick aluminum sections connected with unique thermal breaks. Finish: Smooth, natural anodized aluminum. Consult the factory for a large selection of optional, powder-coated panel colors.
  • Vision area: Up to 5 full-width sections standard.
  • Bottom and side draft seals.
  • Guide tracks: Galvanized steel with enclosed chain. Precision guiding with synthetic side rollers for minimal wear on chains.
  • Aluminum bottom profile with integral electric door panel reversing edge.
  • Cycle counter.

flexmaster-320a

The Flex-Master 320A includes the following standard features

  • 1/8″-thick Bulldog XT PVC panel material.
  • Manual override feature with floor-level chain release.
  • Aluminum bottom bar includes breakaway tab.
  • 2 HP, UL-listed, Vbelt hoist-powered operator.
  • 230/460 V, 3 phase, 60 Hz electric power.
  • Steel roll tube with counter-balanced helical, 50,000-cycle torsion spring.

The Flex-Master is also available in a manual door.

Flex-Master 220A

The Flex-Master 220A includes the following standard features:

  • 1/8″-thick Bulldog XT PVC panel material.
  • Manual override feature with floor-level chain release.
  • Aluminum bottom bar includes breakaway tab.
  • 2 HP, UL-listed, Vbelt hoist-powered operator.
  • 230/460 V, 3 phase, 60 Hz electric power.
  • Steel roll tube with counter-balanced helical, 50,000-cycle torsion spring.

The Flex-Master is also available in a manual door.

Flex-Master 120A

The Flex-Master 120A includes the following standard features:

  • Flexilon S Hypalon-coated nylon panels
  • Optional summer/winter design allows you to replace opaque panels with insect control barrier screen mesh.
  • Aluminum bottom bar includes breakaway tabs.
  • 110-volt, single-phase UL-listed tubular motor.
  • Head curtain with aluminum clamping strip to cover the roll assembly.
  • Constant contact, push-button activation.

Contact

64A Nance Lane
Nashville, TN 37210
Toll Free: 800-742-7406
Phone: 615-742-9950
Fax: 615-742-9951
sales@add-vantagecaster.com

Add-Vantage Caster Contact Us